Harris RTV Clear silicone Sealant
is a fast-curing one-part silicone sealant which cures with atmospheric moisture to form a high-strength rubber seal with excellent adhesion to glass, glazed surfaces, metal, most plastics and coated surfaces. Harris is unaffected by high or low temperatures: its superior physical properties are designed to give outstanding durability and performance.
Harris
is a fast-curing one-part silicone sealant which cures with atmospheric moisture to form a high-strength rubber seal with excellent adhesion to glass, glazed surface, metal, most plastic and coated surfaces. Harris is unaffected by high or low temperature: its superior physical properties are designed to give outstanding durability and performance.
Application:
Bonding Glass, metals ceramics. plastics epoxies, fiberglass, Gasket- Metal to metal flanges, sealing against moisture, dust, shock electrical insulation. Fixing of coil, condenser parts, insulating seal for transistor, and high voltage parts. Formed in place of a gasket to prevent leaks.
Directions for use:
Surface must be clean, Dry, and sound. Mask joint edges with masking tape. Cut open cartridge; screw on nozzle and cut off tip at desired angle. Insert the cartridge in the gun and apply Harris silicone bubble-free continuously into the joint. fill the joint. To the surface, it is necessary within 8 minutes. On tack-free free remove the adhesive tape and smooth again
Caution:
Uncured material may irritate the eyes, reparation system, and skin. In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice. Use only in well-ventilated places. Keep out of reach of children.
